Sale!
$ 19.99 $ 29.99

Clear, yellow-free headlights in about 2 minutes per headlight. The No.1 wipes remove the oxidized layer, a paper towel dries it, and the No.2 wipe seals both lenses with UV protection. No sanding. No tools.

  • Removes oxidation, yellowing & haze
  • UV-protective sealant: results last several months
  • One kit = one complete treatment for both headlights
  • Works on all plastic (polycarbonate) headlight lenses
  • 2 No.1 cleaning wipes (one per headlight) + 1 No.2 UV protection wipe in every kit

How to use the headlight restoration wipes: 3 easy steps

Before you start: make sure the headlight is cool and smooth. Work in the shade, in a ventilated area, and wear gloves. The wipes are single-use.

STEP 1 · CLEANClean each headlight thoroughly with its own unfolded No.1 wipe (one No.1 wipe per headlight), using firm circular pressure until the cloth comes away clean. This lifts the yellow, oxidized layer.
STEP 2 · DRYDry each headlight with a paper towel (any paper towel, napkin or clean rag works). Wait until both headlights are completely dry, or the UV coat in step 3 will not bond.
STEP 3 · COATWhen both headlights are completely dry, wipe both with the single No.2 wipe. Do not unfold it. Cover the whole lens, edges included.

After you finish: do not touch or wet the headlights for 30 minutes, and do not wash the car for 24 hours. Months later, when the lens starts to lose its gloss, repeat the full 3-step process. There is no sealant-only shortcut. Video instructions: How to use our wipes.

What's in the box

Two No.1 cleaning wipes (one for each headlight) for step 1, and one No.2 UV protection wipe that coats both headlights for step 3. Step 2 needs nothing from the box, just a paper towel. One kit is enough for one complete treatment of both headlights.

Wipes vs. the other options

Option Time Sanding Typical cost
Headlight Restoration Kit (wipes) ~2 min per headlight No $19.99
Sanding kit + polish 30–60 min Yes $20–$50
Professional detailer Appointment Their choice $150–$300
New headlight assemblies Install — $200–$800+ per side

What customers say

“I have an 18 year old Honda CRV… Both headlight glasses were pale yellow and opaque… I couldn't have been more wrong, it works just as advertised.”
Andy B.
“Had very scratched up and what you might call ‘crazed’ lights… Professional detailer gave up on them. This made a 90% improvement immediately.”
Chris T.
“so easy to use and a good result, I'm 88 and found no problem.”
Clifford C.
“Results weren't perfect but did improve considerably”
Garry H.

Read all customer reviews · See customer before & after photos

Frequently asked questions

How long does it take? About 2 minutes per headlight. Badly neglected lenses can take a few minutes more on step 1.

How long do the results last? Several months, depending on climate and where the car is parked. When the gloss fades, repeat the full 3-step process.

Do I need to sand? No. The No.1 cleaning wipes remove the oxidized layer chemically. No sandpaper, drill or tools.

Does one kit cover both headlights? Yes. One kit has two No.1 cleaning wipes (one per headlight) and one No.2 UV protection wipe for both headlights, which is one complete treatment.

Will it fix fog inside the headlight? No. Moisture behind the lens means a failed housing seal. The kit treats the outside surface only.

Does it work on severe yellowing? In most cases, yes. Heavily neglected lenses need extra time on step 1, and some need a second full treatment.

How long should I wait before touching or washing the headlights? Do not touch or wet the headlights for 30 minutes, and do not wash the car for 24 hours.

Learn more